Following piping codes are updated. Refer Annexure-A of ReadMeSupplement_v660.pdf for more details.

ASME B31.5 (2010)

ASME B31.8 (2010)

ASME B31.9 (2008)

CODETI (2006)

New feature added to Copy and Paste rows (with Element (from Layout), Material, Section and Load properties). This can be performed through Ctrl+C and Ctrl+V. This new feature will also allow to Copy and Paste multiple rows of layout. This can be performed through Layout Frame->Edit->Copy command. Multiple rows of Copy and Paste is valid only for Layout and NOT for Materials, Loads and Sections.

New feature added to define Forces and Moments as part of Sustained Load / Expansion Load (T1) / Expansion Load (T2) / Expansion Load (T3) using Force Dialog.

New feature added to Find and Replace Element / Data types. This can be performed through Edit->Find and Replace or using Ctrl+H.

New feature added to print element forces separated by element types in global coordinates.

Support Load Summary includes Global displacements at each support for load cases and combinations.

New feature added to show sustained displacements during hanger selection when hangers are pinned. This can be performed through Results->Displacements->Mouse right click->Show sust. disp. during hanger selection.

New Data type "Generic support" added in CAEPIPE to define support stiffnesses using 6x6 stiffness matrix.

Improved title description for graphical plot of Stresses, Stress Ratios and Deflected shapes.

Modified Supplement for EN 13480 (2009) is added in Annexure A of Readme_Supplement.

Bug Correction: Issues error message while importing CAESAR II Version 5.2 Neutral file into CAEPIPE with NODENAME block.

Bug Correction: Find Node dialog does not allow to enter more than 4 characters.

Bug Correction: When Piping Code = B31.4 (2009), in-plane SIF and out-of-plane SIF were set to 1.0 when element type is PIPE even with data type set as Branch SIF/Weld/User SIF/Threaded in CAEPIPE.